Power Tools › westward 41r248 36 welding rod

Weldcote Metals 316L 1/16 X 36 TIG Welding Rod 1 lb. Tube

Weldcote Metals 316L has the same analysis as ER316 except that the carbon content is limited to a maximum of 0.03% in order to reduce the possibility of formation of intergranular carbide precipitation. This filler metal is primarily used for welding... more

RG-45 - Oxy-Acetylene Carbon Steel Welding Rod (R45) - 36 x 1/16 (2 Lb)

RG45 is a copper coated low carbon steel rod which is widely used for oxyfuel welding on mild steel. It has good ductility and good machinability. Its typical minimum weld tensile strength is 45 ksi and it conforms to AWS A5.2 R45. RG45 can be used on... more

Weldcote Metals ER70S-6 1/16 X 36 TIG Welding Rod 1 lb.

ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale produces the highest deposit strength of all the carbon steel MIG wires. ER70S-6 is used for... more

Weldcote Aluminum 5356 3/32 X 36 Tig Welding Rod 10 Lbs.

Weldcote Metals 5356 (commonly referred to as AlMg5) is a 5% magnesium aluminum filler metal that is available for MIG or TIG welding processes. The weld deposit of Weldcote Metals 5356 offers much better corrosion resistance when exposed to salt... more

RG-60 - Oxy-Acetylene Carbon Steel Welding Rod (R60) - 36 x 3/32 (10 Lb)

RG60 is a high strength steel rod which is used for oxyfuel welding on castings steel plates structural pipe and shapes with a minimum weld deposit strength of 60 ksi. RG60 conforms to AWS A5.2 R 60.While this alloy was originally developed and are... more

ER4043 - TIG Aluminum Welding Rod - 36 x 1/8 (5 LB)

ER4043 - TIG (GTAW) – ALUMINUM AWS A5.10 Welding Positions: All INTRODUCTION: TIG welding rod used on many weldable cast and wrought aluminum alloys 5% silicon. Untreated low strength values. Generally recommended for welding 5052 any 6XXX series... more

ER309L - TIG Stainless Steel Welding Rod - 36 x 1/16 (1 LB)

ER309L - TIG (GTAW) - STAINLESS STEEL AWS A5.9 Welding Positions: All INTRODUCTION: High-alloy TIG welding rod. Excellent welding characteristics thanks to high Si content. Suitable for dissimilar joints and buffer layers. Maximum operating temperature... more

Weldcote Metals R60 1/16 X 36 Gas Welding Rod 10 Lbs.

Weldcote Metals R60 is used to produce high tensile strength quality welds on low carbon and low alloy steels such as sheets plates pipes of grade A and B analysis and structural shapes. It is recommended for critical welds that must respond to the... more

Weldcote Metals Aluminum 4043 1/8 X 36 TIG Welding Rod 1 lb.

Weldcote Metals 4043 (commonly referred to as AlSi5) is a 5% silicon aluminum filler metal that is available in spools or cut lengths for MIG or TIG processes. This alloy is recommended for welding 3003 3004 5052 6061 6063 and casting alloys 43 355 356... more

RG-45 - Oxy-Acetylene Carbon Steel Welding Rod (R45) - 36 x 1/8 (2 Lb)

RG45 is a copper coated low carbon steel rod which is widely used for oxyfuel welding on mild steel. It has good ductility and good machinability. Its typical minimum weld tensile strength is 45 ksi and it conforms to AWS A5.2 R45. RG45 can be used on... more

ER309L - TIG Stainless Steel Welding Rod - 36 x 1/16 (5 LB)

ER309L - TIG (GTAW) - STAINLESS STEEL AWS A5.9 Welding Positions: All INTRODUCTION: High-alloy TIG welding rod. Excellent welding characteristics thanks to high Si content. Suitable for dissimilar joints and buffer layers. Maximum operating temperature... more

ER4043 - TIG Aluminum Welding Rod - 36 x 1/8 (1 LB)

ER4043 - TIG (GTAW) – ALUMINUM AWS A5.10 Welding Positions: All INTRODUCTION: TIG welding rod used on many weldable cast and wrought aluminum alloys 5% silicon. Untreated low strength values. Generally recommended for welding 5052 any 6XXX series... more

ER4043 - TIG Aluminum Welding Rod - 36 x 1/16 (1 LB)

ER4043 - TIG (GTAW) – ALUMINUM AWS A5.10 Welding Positions: All INTRODUCTION: TIG welding rod used on many weldable cast and wrought aluminum alloys 5% silicon. Untreated low strength values. Generally recommended for welding 5052 any 6XXX series... more

Weldcote Metals ER70S-2 1/8 X 36 Tig Welding Rod 10 Lbs.

Weldcote ER70S-2 is primarily for single-pass welding of killed semi-killed and rimmed steels but may also be used for some multi pass applications. Because of added deoxidants ER70S-2 can be used for welding steels that have a rusty or dirty surface... more

Weldcote Metals 308L 1/16 In. x 36 In. Stainless Steel MIG & TIG Welding Rods 10lbs

Weldcote Metals 308L has the same analysis as type 308 except the carbon content has been held to a maximum of .03% to reduce the possibility of intergranular carbide precipitation. Ideal for welding Types 304L 321 and 347 stainless steels. This is a... more

ER316L - TIG Stainless Steel Welding Rod - 36 x 1/8 (5 LB)

ER316L - TIG (GTAW) - STAINLESS STEEL AWS A5.9 Welding Positions: All INTRODUCTION: The main component of ER316L is 18Cr-12Ni-2Mo; it is Stainless steel TIG welding wire. The metal of weld bead has excellent corrosion resistance heat resistance and... more

Weldcote Metals 308L 1/16 X 36 TIG Welding Rod 1 lb.

Weldcote Metals 308L has the same analysis as type 308 except the carbon content has been held to a maximum of .03% to reduce the possibility of intergranular carbide precipitation. Ideal for welding Types 304L 321 and 347 stainless steels. This is a... more

Weldcote Metals ER70S-6 1/8 X 36 TIG Welding Rod 1 lb.

ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale produces the highest deposit strength of all the carbon steel MIG wires. ER70S-6 is used for... more

Weldcote Metals 308L 3/32 X 36 TIG Welding Rod 1 lb.

Weldcote Metals 308L has the same analysis as type 308 except the carbon content has been held to a maximum of .03% to reduce the possibility of intergranular carbide precipitation. Ideal for welding Types 304L 321 and 347 stainless steels. This is a... more

Weldcote Metals R45 1/16 X 36 Gas Welding Rod 1 lb.

Weldcote Metals R45 is a copper coated gas welding rod that is used for welding ordinary low carbon steel up to 1/4 thick. It is recommended where ductility and machinability are most important. R45 produces high quality welds which are ductile and... more

Weldcote Metals Aluminum 5356 3/32 X 36 TIG Welding Rod 1 lb.

Weldcote Metals 5356 (commonly referred to as AlMg5) is a 5% magnesium aluminum filler metal that is available for MIG or TIG welding processes. The weld deposit of Weldcote Metals 5356 offers much better corrosion resistance when exposed to salt... more

ER5356 - TIG Aluminum Welding Rod - 36 x 3/32 (2 LB)

ER5356 - ROD - TIG (GTAW) - ALUMINUM AWS A5.10 Welding Positions: All INTRODUCTION: TIG welding rod aluminum with 5% magnesium alloy for use on many weldable cast and wrought aluminum alloys. High strength extremely resistant to corrosion and resistant... more

ER309L - TIG Stainless Steel Welding Rod - 36 x 1/8 (1 LB)

ER309L - TIG (GTAW) - STAINLESS STEEL AWS A5.9 Welding Positions: All INTRODUCTION: High-alloy TIG welding rod. Excellent welding characteristics thanks to high Si content. Suitable for dissimilar joints and buffer layers. Maximum operating temperature... more

ER5356 - TIG Aluminum Welding Rod - 36 x 3/32 (10 LB)

ER5356 - ROD - TIG (GTAW) - ALUMINUM AWS A5.10 Welding Positions: All INTRODUCTION: TIG welding rod aluminum with 5% magnesium alloy for use on many weldable cast and wrought aluminum alloys. High strength extremely resistant to corrosion and resistant... more

ER4043 - TIG Aluminum Welding Rod - 36 x 1/16 (5 LB)

ER4043 - TIG (GTAW) – ALUMINUM AWS A5.10 Welding Positions: All INTRODUCTION: TIG welding rod used on many weldable cast and wrought aluminum alloys 5% silicon. Untreated low strength values. Generally recommended for welding 5052 any 6XXX series... more

ER70S-2 - TIG Mild & Low Alloy Steel Rod - 36 x 1/8 (10 Lb)

ER70S-2 is a copper coated manganese-silicon wire for welding of mild steel and 490 N/mm2 grade steel. Adding on the slight aluminum(Al) titanium(Ti) and zirconium(Zr) metallic elements the weldability is great on all-position pipe welding of root pass... more

Westward Welding Rod ER1100 3/32 in.dia. Tube 20YE05

TIG Welding Rod AWS Classification ER1100 Material Aluminum Process TIG Welding (GTAW) Overall Diameter 0.0938 in Overall Length 36 in Tensile Strength (As Welded) 13 ksi Yield Strength (Minimum Required) Not Rated Yield Strength (As Welded) Not... more

Westward Welding Rod R45 1/16 In Dia. 1 lb. 41R243

Gas Welding Rod Process Gas Welding Series R45 Material Carbon Steel Overall Diameter 1/16 in Overall Length 36 in Tensile Strength (As Welded) 45 ksi Yield Strength (Minimum Required) Not Rated Yield Strength (As Welded) Not Specified Weight 1 lb For... more

Westward Welding Rod R60 3/32 In Dia. 1 lb. 41R251

Gas Welding Rod Process Gas Welding Series R60 Material Carbon Steel Overall Diameter 3/32 in Overall Length 36 in Tensile Strength (As Welded) 60 ksi Yield Strength (Minimum Required) Not Rated Yield Strength (As Welded) Not Specified Weight 1 lb For... more

WESTWARD 41R250 36" Welding Rod 1/16" Dia., AWS R60, 10 lb.

Gas Welding Rod, Process Gas Welding, Series R60, Material Carbon Steel, Overall Diameter 1/16 in, Overall Length 36 in, Tensile Strength (As Welded) 60 ksi, Yield Strength (Minimum Required) Not Rated, Yield Strength (As Welded) Not Specified, Weight... more

WESTWARD 41R244 36" Welding Rod 1/16" Dia., AWS R45, 10 lb.

Gas Welding Rod, Process Gas Welding, Series R45, Material Carbon Steel, Overall Diameter 1/16 in, Overall Length 36 in, Tensile Strength (As Welded) 45 ksi, Yield Strength (Minimum Required) Not Rated, Yield Strength (As Welded) Not Specified, Weight... more

WESTWARD 23XM58 36'' TIG Welding Rod 3/32" Dia., AWS ER309L, 10 lb.

Tig Welding Rod, AWS Classification ER309, ER309L, Material Stainless Steel, Process TIG Welding (GTAW), Overall Diameter 0.0938 in, Overall Length 36 in, Tensile Strength (As Welded) 85 ksi, Yield Strength (Minimum Required) 58 ksi, Yield Strength (As... more

Crown Alloy 1/8 x 36" SIL-BRONZE BR.PKG. Silicon Bronze TIG 1 lb TUBE

Crown Silicon Bronze is a copper-silicon-manganese alloy welding rod used to weld copper, brass and dissimilar combinations. Excellent results when used on galvanized and thin sheet metal using TIG or MIG. Please Note: Welding fumes and gases can be... more

Crown Alloy 3/32 x 36" SIL-BRONZE BR.PKG. Silicon Bronze TIG 1 lb TUBE

Crown Silicon Bronze is a copper-silicon-manganese alloy welding rod used to weld copper, brass and dissimilar combinations. Excellent results when used on galvanized and thin sheet metal using TIG or MIG. Please Note: Welding fumes and gases can be... more

Crown Alloy 1/16 x 36" SIL-BRONZE BR.PKG. Silicon Bronze TIG 1 lb TUBE

Crown Silicon Bronze is a copper-silicon-manganese alloy welding rod used to weld copper, brass and dissimilar combinations. Excellent results when used on galvanized and thin sheet metal using TIG or MIG. Please Note: Welding fumes and gases can be... more

Westward Welding Rod ER70S-2 1/16 In Dia. 1 lb. 41R375

TIG Welding Rod AWS Classification ER70S-2 Material Carbon Steel Process TIG Welding (GTAW) Overall Diameter 0.0625 in Overall Length 36 in Tensile Strength (As Welded) 70 ksi Yield Strength (Minimum Required) 58 ksi Yield Strength (As Welded) 58 ksi... more

Westward Welding Rod ER70S-2 3/32 In Dia. 1 lb. 41R377

TIG Welding Rod AWS Classification ER70S-2 Material Carbon Steel Process TIG Welding (GTAW) Overall Diameter 0.0938 in Overall Length 36 in Tensile Strength (As Welded) 70 ksi Yield Strength (Minimum Required) 58 ksi Yield Strength (As Welded) 58 ksi... more

Westward Welding Rod ER312 1/16 In Dia. 1 lb. 41R347

TIG Welding Rod AWS Classification ER312 Material Stainless Steel Process TIG Welding (GTAW) Overall Diameter 0.0625 in Overall Length 36 in Tensile Strength (As Welded) 109 ksi Yield Strength (Minimum Required) 78 ksi Yield Strength (As Welded) 78 ksi... more