You're in Home Hardware
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Material
By Home Hardware Types
By Home Hardware Features
By Keyword
Best Seller | These T-27 Torx security barrel nuts are constructed of stainless steel and come in a satin finish. They feature tamper-resistant 6-lobe security drives with center pins that assist in preventing loosening and removal of mounted partition hardware.... more | FREE shipping go to store |
Prime-Line Stainless Steel, Dead Latch Door Strike | 5.35 H x 3.75 W x 0.7 D in | Wayfair E 2301 These standard latch strikes are constructed of steel and come in a stainless steel finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included... more | go to store |
Prime-Line One Way Barrel Nut Stainless Steel in Gray | 1 H x 4 W x 4 D in | Wayfair 642-0454 These tamper-resistant barrel nuts are constructed of stainless steel and come in a satin finish. The heads of each barrel nut are constructed with a one-way security feature which allows for easy install with a flat screwdriver, but require the use of... more | FREE shipping go to store |
This is a high security latch lip strike that is constructed of stamped steel and it comes in a brass plated finish. Designed to replace a standard strike plate for maximum security. Installation of this strike strengthens a locked door with six, 3 in.... more | FREE shipping go to store |
This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of... more | FREE shipping go to store |
This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are... more | FREE shipping go to store |
This is a solid brass keeper with steel chain door guard and slide bolt. Typically these are used on inswing doors that you may want extra security on. With this door guard properly installed you can safely and securely either vent the room or open... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... more | go to store |
This deadbolt door lock is constructed of steel and comes finished in a zinc color. It features a two-point locking mechanism that engages into the door frame header and threshold for increased security. This deadbolt lock has a 1-1/8 in. backset with... more | FREE shipping go to store |
Has the roller on your screen door damaged or missing? This steel ball bearing roller features a 1 inch center grooved wheel. Also features a 1/4 inch diameter axle hole. Used by many door manufacturers. Order your roller replacement now to repair your... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Texas Security... more | go to store |
This is a deadbolt strike that is constructed from stamped steel and comes in a bright brass finish adn comes in a 2 piece set. They are easy to install into your wood or metal door jamb. Can be used with a wide variety of residential and commercial... more | go to store |
This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow... more | go to store |
Prime-Line Pocket Door Hardware, Steel in Gray | 3.45 H x 2.95 W x 0.65 D in | Wayfair MP11343-1 These barrel bolt locks by Prime-Line Products are constructed of steel and come in a corrosion resistant zinc-plated finish. These locks can be used in both a horizontal and vertical position, and each pack includes a keeper and fasteners. Locks like... more | go to store |
This is a deadbolt used on commercial aluminum or steel doors. It is a single point lock with a pivoting laminated steel bolt. The bolt is activated by a pivoting mechanism by the key cylinder or thumb turn. It comes with a faceplate and fasteners. The... more | go to store |
This is a maximum security deadbolt strike that is constructed of stamped steel and it comes in a brass plated finish. Designed to replace a standard strike plate for maximum security. Installation of this strike strengthens a locked door with six, 3... more | go to store |
This combo deadlatch and deadbolt strike is constructed from steel and comes in a matte black finish. It features six 3 in. long screws that provide maximum security. This type of combo is quick and easy to install. Replaces standard latch and deadbolt... more | go to store |
This Bi-Fold Door bottom pivot by Prime-Line Products is constructed of both steel and plastic components. The steel bolt comes in a corrosion-resistant, zinc-plated finish. This bi-fold door pivot features a bottom mount design with a hex head bolt... more | go to store |
This through-door mail slot sleeve fits all 7-1/2 in. in-door mail slots. Allows for in-door slots to be used on hollow core doors. It is constructed of stainless steel construction. Hides hollow-core foam and is easy to install. | Prime-Line Mail Slot... more | go to store |
This is an anti-lockout emergency access tool made of stainless steel with red rubber grip handle. Used for unlocking vehicle doors with "slide-bar" security door lock. Tool slides between the door and the jamb to disengage the slide bar. | Prime-Line... more | go to store |
These wall mount door stops are constructed of cast stainless steel and come in a satin finish. These door stops feature a 2-in. projection and a black rubber tip. They are designed for use with all swinging doors and have 1-5/8-in. mounting hole... more | go to store |
This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are... more | FREE shipping go to store |
This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are... more | go to store |
This is a surface mount door hinge set that is left-hand in, right-hand out for use on left-hand inswing and right-hand out-swinging doors. They are self-closing. The hinges are constructed of satin stamped stainless steel. The package includes the top... more | FREE shipping go to store |
These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO... more | go to store |
These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO... more | go to store |
This is a stainless steel unique housing tandem roller assembly, often found on Andersen sliding patio doors as well as a variety of other manufacturers of wood patio doors. It has two 1-1/4 in. concave stainless steel ball bearing rollers set in a... more | FREE shipping go to store |
This is a K-tab patio door roller assembly with a 1-1/4 in. concave stainless steel ball bearing roller set in a corrosion resisting aluminum housing. The T-shaped tab is simply slid up into a tee shaped receptacle in the bottom of the patio door. No... more | go to store |
These ball bullet catch and strikes are constructed of solid brass and steel components. Each catch features fully adjustable barrels, and they install on the top edges of hinged-swinging doors, or on their vertical edges. These ball catches help keep... more | go to store |
These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO... more | go to store |
These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO... more | go to store |
These cable clamps are constructed from galvanized aluminum. They include steel nuts and bolts and are used to clamp cable loops into fixed positions. These cable clamps measure 1/16 in. and a normal loop assembly would use three clamps. | Prime-Line... more | go to store |
These ball bullet catch and strikes are constructed of solid brass and steel components. Each catch features fully adjustable barrels, and they install on the top edges of hinged-swinging doors, or on their vertical edges. These ball catches help keep... more | go to store |
This is a keyed step-on sliding door lock. The steel bolt securely locks your door in a closed or ventilating position. Convenient foot operated design. Allows you to lock your door or open it slightly and still allow ventilation while keeping your... more | go to store |
Prime-Line Combination Door Strike, Steel in Brown | 13.75 H x 3.75 W x 0.88 D in | Wayfair U 10538 This maximum security combination strike is constructed of stamped steel and it comes plated in a classic bronze finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to... more | go to store |
This is a 1-1/8 in. bright brass latch bolt filler plate. These are typically used to cover the mortise hole on door edge or jamb when a hole is no longer being used for a lock or strike. Each door filler plate is constructed from heavy gauge steel and... more | go to store |
These ball bullet catch and strikes are constructed of solid brass and steel components. Each catch features fully adjustable barrels, and they install on the top edges of hinged-swinging doors, or on their vertical edges. These ball catches help keep... more | go to store |
Ads related to door barrel bolt stainless steel